Our PS charger
utililizes our patented "3 Stage Plus"
technology to interact with the battery and provide exactly the right amount
of charge. Interacter "3 Stage Plus"
charging technology eliminates undercharging, overcharging, or damage to
the battery, and is completely safe. The Interacter PS can be used to recharge
virtually any type lead-acid battery including conventional liquid electrolyte,
maintenance-free absorbed electrolyte, deep-cycle, and gelled type batteries.
circuitry with patented program in EPROM, controls four separate
A constant current bulk charge is applied to achieve the fastest possible
return of energy to the battery.
This constant voltage stage is proportionally timed and temperature compensated,
minimizing electrolyte breakdown and gas emission.
The final standby float charge stage will replace standing losses and keep
the battery in a fully charged state & "Ready".
As soon as the battery is connected, a desulfation circuit encourages the
breakdown of large sulfate crystals which can develop during prolonged
periods of deep discharge.
Current Limit Protection
DC Power While Charging
Stage Plus Control
Preferred LED Amp Meter
ready Lamp / Fault indicator
C.V. Stage / 80% Returned
A low voltage start circuit
which will recharge overdischarged batteries from as low as 400 millivolts.
Incorporated in the PS is a
sample and hold circuit which eliminates voltage sensing errors and prevents
parasitic discharge during A.C. power loss.
Electronic short circuit and
reverse polarity shutdown, without blowing fuses, an exceptional safety
The built in electronic timer
monitors the time taken from start of charge until the battery voltage
reaches the first preset voltage limit. The time duration for the second
is automatically calculated in proportion to the time taken for the first
stage. This feature is specifically designed to optimize charging on a
wide range of battery types, ages and sizes.
A customer preferred L.E.D.
Amp guage indicates the current output without fragile miving meters or
energy loss. A green ready indicator shows positively that the battery
is ready for use or will flash if there is an override timeout.
| Main Page
| Professional Series
| RT Professional
| Industrial Commercial Series
| Options & OEM
| Lineage Series
| Fleet Gang Chargers
| Other Products